美国MERCOTAC水银滑环，430型无刷滑环， Slip Ring大量现货，M430C蓝色

美国MERCOTAC水银滑环，430型无刷滑环， Slip Ring

430型无刷滑环

导体:四导体

放大器:2@4A和2@30A

伏:250

Mercotac®430型是需要连接敏感热电偶信号和为加热元件供电的加热辊应用的理想选择。它也是紧凑，低成本和可靠的滑环的绝佳选择，可以处理机器人，医疗设备或包装机械中的信号和电源连接。

优点:

耐用，紧凑，低成本

用于信号和/或电源连接

易于安装和更换

IP 51防护等级与启动套件

重量轻，坚固的金属结构

耐用、节能、免维护

美国制造

Model 430 Product Specifications

Dimensions

• Details:

• Disconnects are included.

• 55252 Large Straight Disconnect (Qty. 4)

• 55250 Large Straight Disconnect (Qty. 2)

• 55251 Large Flag Disconnect (Qty. 2)

• • Available with stainless steel ball bearing (430-SS) (recommended for wet or corrosive environments).

• Dust/Splash Boot Kit available.

Specifications

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

Accessories

Description: Plug Kit
Item #: 50430

• Terminals for wire gauges

• 20-16 AWG and 16-14 AWG

• Suitable up to 20A

• Also order 5030-T for crimping terminals

Description: Plug Assembly
Item #: 50431

• 12 inch length wires

• 14 AWG for high current channels

• 18 AWG for low current channels

• Suitable for up to 20A

MORE DETAILS

Description: Boot Kit Parts
Item #: 57430

• Vinyl Boot Kit for dust and splash protection

• IP51 protection rating

Description: Boot Kit Shown Assembled
Item #: 57430

• Vinyl Boot Kit for dust and splash protection

• IP51 protection rating

Description: Large Flag Disconnect, Insulated
Item #: 55251

• 16 AWG - 14 AWG

• Qty. 2 included

• Maximum recommended Amps: 15

Description: Large Straight Disconnect, Insulated
Item #: 55250

• 16 AWG - 14 AWG

• Qty. 2 included

• Maximum recommended Amps: 15

Description: Small Straight Disconnect, Insulated
Item #: 55110

• 22 AWG - 18 AWG

• Qty. 4 included

• Maximum recommended Amps: 4

Description: Plug Terminal Crimping Tool
Item #: 5030-T

• For use with 50430 Plug Kit

• Not included, order separately

Description: Other Disconnects

• Disconnects for other wire gauges are available and can be substituted for the standard disconnects(22-18 AWG and 12-10 AWG). See Ampacity Table

Mounting

Model 430 is typically mounted by either the black body or the white plastic bushing on either end using a set screw or split clamp. When used horizontally, mount the Mercotac so the body of the connector rotates.

Body Mount

Bushing Mount

Horizonal Mount to Body

Good mounting method
(but vertical orientation is better)

Adaptor Mount to Body

Use when the shaft diameter is smaller
than the body of the Mercotac.

Horizonal Mount to Bushing

Used if the shaft
cannot be fitted to the body diameter.

Thermal Insulated Mount to Bushing

May be needed if thermal insulation is necessary
Used if the shaft cannot be fitted to the body diameter.

Top Mount to Body

Best mounting method.

Bottom Mount to Bushing

Floating Torque Arm Mount to Body

Protective Housing Mount to Body

Recommended for wash-down or dirty environments.
Also recommended for food processing .

Vibration Isolation Mount to Body

With flexible bellows.

Vibration Isolating Mount to Body

With floating drive coupling.

Installation Notes:

• The up arrow should not point below horizontal.

• Do not solder to or bend terminals.

• Avoid lateral forces and mechanical loads (overly stiff or tight wires).

• Do not rigid mount both ends of the Mercotac.

• Limit the mounting eccentricity (runout / wobble) to .005" (.13mm).

• Provide overload protection within the circuit.

• Avoid vibration and bumping motions.

Connections

Model 430 Standard Wire Connections

1. Wire connections, mounted inside rotating shaft.

2. Stationary end showing standard wire connections.

3. Wires crimp to terminals.
(Suggested tool: Thomas & Betts #WT 112M)

Model 430 Wire Connections with Optional Boot Kit

Wire connections, mounted inside rotating shaft.

Stationary end showing optional boot kit.

Cutaway view.

Wire connections, mounted inside rotating shaft.

Stationary end showing optional boot kit.

Model 430 Wire Connections with Optional Quick Connect Plug

Stationary end. Plug body inside rubber boot.

Rotating end. Plug body fits inside rotating shaft.

Benefits:

• Quick and easy 430 installation

• Eases terminal orientation and correct wiring

• Pulling on wires won’t loosen plug connection

• Safely releases by pulling on plug body

• Eliminates risk of electrical shock

Features:

• Fits Models 430 and 430-SS

• Rated at 250 V AC/DC up to 20 Amps

• Includes Plugs for both ends of a model 430

• Includes protective vinyl elbow boot for stationary end

• Available assembled with wires (Plug Assembly # 50431) or as a kit without wires (Plug Kit # 50430)

• Crimp Tool for attachment of Kit 50430 to your wires (14 Awg and 18 Awg) Order Part # 5030-T

低成本和紧凑的Mercotac 430型滑环是一种多功能解决方案，可用于各种行业，包括包装，医疗设备和机器人。在包装行业，它可以确保塑料袋和食品容器的一致和高质量的密封，因为它允许连接敏感的热电偶信号和加热元件的电源。此外，滑环的多个触点是机器人应用中传感器和执行器都需要连接的理想选择。其可靠的性能、易于安装和成本效益使430型滑环成为需要电源和信号连接的滑环应用的绝佳选择。

查看我们的应用页面，了解更多关于Mercotac产品如何使用的示例。