美国MERCOTAC默克泰，104型和110型无刷滑环，水银滑环

美国MERCOTAC默克泰，104型和110型无刷滑环，水银滑环

104型和110型无刷滑环

导体:单导体

安培:4或10

转速:7500或3600

Mercotac®110型无刷滑环专为需要单通道的高达10A的应用而设计。Mercotac型号104虽然具有较低的额定电流，但专为更高的RPM应用而设计。这些型号旨在安装在垂直旋转轴的底部或任何需要螺纹螺柱安装或连接的地方。它们通常用于电镀，接地和静电荷应用，也适用于微电子，湿度传感，金属线疲劳测试等。

优点:

耐用，紧凑，低成本

用于信号和/或电源连接

易于安装和更换

重量轻，坚固的金属结构

耐用、节能、免维护

美国制造

Model 104 & Model 110 Product Specifications

Dimensions

• Details:

• Disconnects are not included.

• Available with stainless steel ball bearing (104-SS & 110-SS)(recommended for wet or corrosive environments).

Specifications

• "SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

• "L" designator indicates low torque (may only be operated vertically)

• Note: The body of the 104 & 110 series Mercotac is electrically "hot" to the internal conductor

Accessories

Connector options are noted below. They are not included with a 104/110T Mercotac purchase. Order the desired connector(s) separately.

Description: One Contact Receptacle
Item #: 5920

• One solder holes for 18 AWG wire

• Suitable up to 10 Amps

Description: One Contact Receptacle
Item #: 5921-S

• With one pre-attached 6” wire (18 AWG)

• Suitable up to 4 Amps

Description: Ring Terminal
Item #: 55337

• For 12-10 AWG wires

• Suitable up to 10 Amps

Description: One Contact Cap
Item #: 5952

• With one solder lug for 18 AWG wire

• Suitable up to 4 Amps

Description: A receptacle is used for mounting to the rotating device. The accessories are required for wire connections, since the Mercotac units cannot be soldered to directly. Order Separately.

Mounting

Models 104 & 110 are typically mounted by either the black body or the top contact. When used horizontally, mount the Mercotac so the body of the connector rotates

Receptable Mount

Bottom Mount with Conductive Shaft

Preferred mounting orientation.

Vertical Mount with Electrically Insulated Shaft

The Mercotac body is electrically hot. An electrically insulated shaft can isolate it, if needed.

Horizontal Mount with Electrically Insulated Shaft

The Mercotac body is electrically hot. An electrically insulated shaft can isolate it, if needed.

Thermal & Electrically Insulated Horizontal Mount

Use if electrical and thermal insulation is needed

Vibration Isolating Mount

Protective Housing Mount with Conductive Shaft

Installation Notes:

• The up arrow should not point below horizontal.

• Do not solder to or bend terminals.

• Avoid lateral forces and mechanical loads (overly stiff or tight wires).

• Do not rigid mount both ends of the Mercotac.

• Limit the mounting eccentricity (runout / wobble) to .005" (.13mm).

• Provide overload protection within the circuit.

• Avoid vibration and bumping motions.

Connections

Model 104 & Model 110 Standard Wire Connections

Ring terminal for stationary wire attachment.

Metal receptacle press fits onto rotating member of machine.

Ring terminal for stationary wire attachment.

The Mercotac unit plugs into the receptacle after the receptacle is press fit into the rotating member of the machine.

Mercotac型号104和110无刷滑环是一种耐用的电气连接，用于在旋转和固定部件之间传输电力和信号。110型设计用于高达10A的应用，并在各个行业提供多功能性，而具有4安培额定电流的104型用于更高rpm的应用。一些应用程序包括

电镀:用于连接旋转电极

接地:用于转轴接地。

静电荷:用于给旋转装置施加静电荷

除了这些应用之外，这些滑环还适用于微电子，化学电镀过程控制，金属丝疲劳测试，干草捆水分传感等。它们还用于风力涡轮机、机器人系统、医疗扫描设备、天线、电机、发电机、泵、输送机、电梯、自动扶梯和许多其他应用。这些单元在苛刻的条件下提供可靠的连接，使其成为各行业的宝贵资产。

查看我们的应用页面，了解更多关于Mercotac产品如何使用的示例。