美国MERCOTAC莫克泰水银滑环，M130型无刷滑环
130型无刷滑环
导体:单导体
安培:30
Mercotac®130型无刷滑环是一种紧凑的单通道滑环，适用于需要高达30安培电流容量的应用。它是专门为需要比型号110或110- t更大电流容量的应用而设计的，但不需要型号1250的250安培功率。这种滑环是理想的电镀和焊接用途，但也可用于自动化机械，矿物加工和其他应用
优点:
耐用，紧凑，低成本
用于信号和/或电源连接
易于安装和更换
IP 51防护等级与启动套件
重量轻，坚固的金属结构
耐用、节能、免维护
美国制造
Model 130 Product Specifications
Dimensions
Specifications
| Model No. |
Terminals |
Body Material |
Bearing Type |
Max. Rotational Torque
(gf-cm) |
Max. Voltage Rating
(AC/DC) |
Max. Current Rating
(Amps) |
Max. Rotational Speed
(RPM) |
Operating Temp.
Min °F (°C)
Max °F (°C) |
Max. Frequency (MHz) |
Contact Resistance
(mΩ) |
Circuit Separation
(MΩ) |
| 130 |
1 |
Anodized Aluminum |
Chrome Steel |
75 |
N/A |
30 |
2000 |
Min -20 (-29)
Max 140 (60) |
200 |
<1 |
>N/A |
| 130-SS |
Stainless Steel |
"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
Accessories
Connector options are noted below. They are not included with a 130 Mercotac purchase. Order the desired connector(s) separately.
Description: Boot Kit Parts
Item #: 57130
Description: Boot Kit Assembled
Item #: 57130
Note: For attaching the wires, use a ring terminal with a hole large enough for a 5mm stud. Not currently offered. Purchase externally separately.
Mounting
Mercotac Model 130 is typically mounted by the threaded stud on either end or by the black body using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates
Bottom Mount with Conductive Shaft
Preferred mounting orientation.
Top Mount with Conductive Shaf
Horizontal Mount with Conductive Shaft
Installation Notes:
-
The up arrow should not point below horizontal.
-
Do not solder to or bend terminals.
-
Avoid lateral forces and mechanical loads (overly stiff or tight wires).
-
Do not rigid mount both ends of the Mercotac.
-
Limit the mounting eccentricity (runout / wobble) to .005" (.13mm).
-
Provide overload protection within the circuit.
-
Avoid vibration and bumping motions.
Connections
1. Threaded connection to rotating shaft.
1. Threaded connection to rotating shaft.
2. Stationary end showing wire attached with a ring terminal.
Model 130 Wire Connections with Optional Boot Kit
1. Threaded connection to rotating shaft.
2. Stationary end showing optional boot kit.
3. Cutaway view.
Mercotac 130型无刷滑环提供了紧凑，低成本和高性能的电气连接，在需要高达30安培电流的广泛应用中是无与伦比的。它比其他替代品小得多，使其成为空间限制应用程序的理想选择。一些可能的用途是带状电镀线，一般电镀和零件的电铸。另一个典型的应用是焊接，例如在旋转生产转台上进行点焊。它为低电阻，稳定的电气连接提供了经济高效的解决方案，是许多行业的理想解决方案。这种无刷滑环的应用只受想象力的限制。
查看我们的应用页面，了解更多关于Mercotac产品如何使用的示例。