105型和110T型无刷滑环
导体:单导体
安培:4或10
转速:7500或3600
Mercotac®型号110-T和105无刷滑环用于提供可靠的轴接地解决方案，使其非常适合HVAC和VFD电机轴接地应用。这些型号可确保有效的电气接地，最大限度地降低昂贵的轴承损坏风险，并提高整体系统性能。110-T型也用于低电流电镀和焊接应用。通常，105型用于更高转速的应用。这些滑环在电镀、自动化机械、矿物加工、焊接等行业中表现优异。
优点:
耐用，紧凑，低成本
用于信号和/或电源连接
易于安装和更换
重量轻，坚固的金属结构
耐用、节能、免维护
美国制造
Model 105 & Model 110T Product Specifications
Dimensions
_836.jpg)
Specifications
| Model No. |
Terminals |
Body Material |
Bearing Type |
Max. Rotational Torque
(gf-cm) |
Max. Voltage Rating
(AC/DC) |
Max. Current Rating
(Amps) |
Max. Rotational Speed
(RPM) |
Operating Temp.
Min °F (°C)
Max °F (°C) |
Max. Frequency (MHz) |
Contact Resistance
(mΩ) |
Circuit Separation
(MΩ) |
| 110-T |
1 |
Anodized Aluminum |
Chrome Steel |
35 |
N/A |
10 |
3600 |
Min -20 (-29)
Max 140 (60) |
200 |
<1 |
N/A |
| 110-TS |
Stainless Steel |
| 110-TL |
Chrome Steel |
10 |
1200 |
| 105 |
Chrome Steel |
<10 |
4 |
7500 |
Min 45 (7)
Max 140 (60) |
| 105-SS |
Stainless Steel |
-
"T" designator indicates standard model (receptacle mount)
-
"TS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
-
"TL" designator indicates low torque
-
"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
-
Note: The body of the 110-T / 105 series Mercotac is electrically "hot" to the internal conductor
Accessories
Connector options are noted below. They are not included with a 105/110T Mercotac purchase. Order the desired connector(s) separately.
Description: One Contact Receptacle
Item #: 5920
Description: One Contact Receptacle
Item #: 5921-S
Description: One Contact Cap
Item #: 5952
Description: A receptacle is used for mounting to the rotating device. The accessories are required for wire connections, since the Mercotac units cannot be soldered to directly. Order Separately.
Mounting
Models 105 & 110T are typically mounted by either the black body or the contact on either end. Body mount typically uses a set screw or split clamp. Contact mount is held in the installed receptacle by a spring fit. It is best to mount the Mercotac so the body of the connector rotates
Receptable Mount
Top Mount with Conductive Shaft
Preferred mounting orientation.
Bottom Mount with Conductive Shaft
The Mercotac body is electrically hot. An electrically insulated shaft can isolate it, if needed.
Horizontal Mount with Conductive Shaft
Thermal & Electrically Insulated Horizontal Mount
Use if electrical and thermal insulation is needed
Vibration Isolating Mount
Protective Housing Mount with Conductive Shaft
Installation Notes:
-
The up arrow should not point below horizontal.
-
Do not solder to or bend terminals.
-
Avoid lateral forces and mechanical loads (overly stiff or tight wires).
-
Do not rigid mount both ends of the Mercotac.
-
Limit the mounting eccentricity (runout / wobble) to .005" (.13mm).
-
Provide overload protection within the circuit.
-
Avoid vibration and bumping motions.
Connections
Model 105 & Model 110T Standard Wire Connections
Metal receptacle press fits into rotating member of machine.
Plastic cap with solder lug to attach stationary wire.
The Mercotac unit plugs into the receptacle after the receptacle is press fit into the rotating member of the machine.
The cap plugs onto the stationary end of the Mercotac for the attachment of stationary wires.
Mercotac型号110-T和105无刷滑环在广泛的应用中表现出色，包括电镀，自动化/电子控制/机械行业，包装行业和加热辊。
在电镀工业中，这些模型既用于带镀线的旋转电极，也用于电铸，其中通过电沉积金属在旋转电极上形成零件。焊接行业使用这些作为点焊的电气连接，其中部分是移动的，例如在唱机转盘上。在使用VFD(变频驱动器)的电机中，这些模型用于接地电机轴上感应的电压，保护滚珠轴承免受EDM损坏
Mercotac滑环在碳纳米管生产和3D金属打印等尖端技术中占有一席之地，这些技术的精度和可靠性至关重要。矿物加工行业也依赖于这些滑环在苛刻的环境中高效和一致的操作。Mercotac 110-T和105型无刷滑环具有良好的跟踪记录和多功能，是多个行业值得信赖的解决方案。
查看我们的应用页面，了解更多关于Mercotac产品如何使用的示例。