| ROOM TEMP./HUMI. TRANSMITTER GSTH-1420 | GSTH-1100 | GRTHO-1420 | GRTHO-1420pt100 | GRTHO-1420pt1000 | GRTHO-1420N3K | GRTHO-1420S |
 |
| ROOM TEMP./HUMI. TRANSMITTER (GRTHO-1420pt1000)"GRTHO" Room Temperature & Humidity Transmitter is intended control transmitter by sensingrelative humidity and temperature of room ventilation and air-handling units.Also can be used interface detect transmitter with sensing value display or auto control system of building.● Pulp , Food ware house , green house , computer room , R & D room , Hosptial etc.● Use as measuring Transmitter : In case of Optimistic function system |
 |
| |
| ● SUPPLY VOLTAGE : DC15~30V● OUTPUT SIGNAL : Temp./ Pt1000Ω , Humidity / 4 ~ 20mA● SENSING RANGE : Temp./-10~70℃ , Humidity / 0~100%Rh● SENSING ELEMENT : Pt1000Ω / Integrated Circuit● TEMPERATURE CO-EFFICENT : 0.00385 OHMS● SELF GENERATING CURRENT : Below 2mA (0.02 OHM / 0.05Deg.)● ACCURACY : at 25℃ within ±0.3℃ at 10~90%Rh , within ±3%Rh● Wiring : 5 Wire● SENSING TIME : Approx. 20sec.● AMBIENT TEMPERATURE ; 1) On operation : -10~70℃ 2) On transportation & storage : -25~65℃● AMBIENT HUMIDITY ; 1) On operation : Below 100%Rh 2) On transportation & storage : Below 95%Rh● PROTECTION CLASS : IP30 (EN60529)● WEIGHT : 0.10KG. |
 |
| |
| |
 |
| |
| |
OUTSIDE TEMP./HUMI. TRANSMITTER
Model
PDF Download
GOTH-1420
GOTH-1100
GOTHO-1420
GOTHO-1420pt100
GOTHO-1420pt1000
GOTHO-1420N3K
GOTHO-1420S
ROOM TEMP./HUMI. TRANSMITTER
Model
PDF Download
GSTH-1420
GSTH-1100
GRTHO-1420
GRTHO-1420pt100
GRTHO-1420pt1000
GRTHO-1420N3K
GRTHO-1420S
DUCT TEMP./HUMI. TRANSMITTER
Model
PDF Download
GDTH-1420
GDTH-1100
GDTHO-1420
GDTHO-1420(pt100)
GDTHO-1420pt1000
GDTHO-1420N3K
GDTHO-1420S
GDTHO-1420(3/4)
Application
“GRTHO” Room Temperature & Humidity Transmitter is intended control transmitter by sensing
relative humidity and temperature of room ventilation and air-handling units.
Also can be used interface detect transmitter with sensing value display or auto control system of
building.
Equipment Combinations
l Pulp/textile/ Food warehouse, greenhouse, computer room, R&D room, Hospital etc.
l Use as measuring Transmitter : In case of Optimistic function system
Technical Data
l SUPPLY VOLTAGE : DC 15~30V
l OUTPUT SIGNAL : Temp. / Pt1000Ω, Humi./4-20mA
l SENSING RANGE :Temp./ -10~+70℃, Humi./ 0~100%RH
l SENSING ELEMENT :PT1000Ω / Integrated Circuit
l TEMPERATURE CO-EFFICENT : 0.00385 OHMS
l SELF GENERATING CURRENT :below 2mA (0.02 OHM / 0.05Deg.)
l ACCURACY :at 25℃Within ±0.3℃ at10~90%RH, Within ±3%RH
l WIRING : 4 and 5 wires
l SENSING TIME :Approx 20sec
l AMBIENTTEMPERATURE :
1) On Operation: -10~+70℃
2) On Transportation& Storage: -25~+65℃
l AMBIENT HUMIDITY :
1) On Operation : below 100%RH
2) On Transportation & Storage : below 95%RH
l PROTECTION CLASS : IP30(EN 60529)
l WEIGHT : 0.10Kg
Notes
l Engineering:
1) In case of control: Preferably install on the wall of house or building, and keep away from
direct light.
Mounting & Installation
l Installation height: Preferably install in the middle of house, building or heating area, and to
be installed at least 1.5 meter above from the floor.
l Prohibited Location: Window, door, Ventilating hole, upper place of heat source, and veranda
or beneath the eaves of roof.
l To prevent any detecting error from convection of warm, air, cable wire tube of transmitter
should be shielded and must not be painted.