Model T6100 Lock in Place I/P Pressure Transducer
Part Number: T6100
Uniquely designed by Rotork Fairchild, the T6100 "Lock in Last Place" I/P pressure transducer provides flexibility, reliability and safety in applications requiring protection from signal failures to critical control system instruments. Its simple yet effective voice coil actuation now locks in "last position" to accurately capture the setpoint with extremely low drift after a power loss permits the T6100 to maintain set point. The unit's IP65 rating allows you to handle moist applications with ease. Design of the T6100 relies on a proprietary integrated solenoid valve module interposed between the flapper nozzle pilot and the booster section. Upon signal failure, an electrical charge stored within the active electronic circuit controlling the integrated solenoid valve module, maintains the current to the voice coil at it's last set point. Simultaneously, a high energy pulse closes the solenoid valve, trapping the signal pressure within the signal chamber at the last setpoint. The booster continues to provide its normal forward and exhaust flow, with the constant signal pressure now captured and maintained within the signal chamber. Advanced valve orifice design of the T6100 increases its forward flow capacity to a minimum of 5-scfm at 21-psig supply pressure.
Features
-
Locks in "last position"
-
Extremely low drift after power loss
-
IP65 rated
-
Single part number specification
-
Moisture resistant PCB and zinc coated components
Benefits
-
Accurately captures setpoint if power is lost
-
Permits transducer to maintain set point
-
Unit handles moist applications
-
Makes it easy to specify and cover all your needs
-
Superior construction for moisture resistance in tough applications
T6100型锁定就位I/P压力传感器
部件编号:T6100
T6100型锁定就位I/P压力传感器
由Rotork Fairchild独特设计的T6100“锁在最后位置”I/P压力传感器为需要保护关键控制系统仪器免受信号故障的应用提供灵活性，可靠性和安全性。其简单而有效的音圈驱动现在锁定在“最后位置”，以便在功率损耗后以极低的漂移准确捕获设定值，从而使T6100保持设定值。该设备的IP65等级可让您轻松处理潮湿应用。T6100的设计依赖于一个专有的集成电磁阀模块，该模块插入挡板喷嘴先导和助推器部分之间。在信号失效时，存储在控制集成电磁阀模块的有源电子电路中的电荷将音圈的电流维持在最后设定点。同时，一个高能脉冲关闭电磁阀，在最后一个设定值处将信号压力困在信号室内。助推器继续提供其正常的前向和排气流量，恒定的信号压力现在被捕获并保持在信号室内。T6100先进的阀孔设计在21 psig的供应压力下将其前向流量增加到至少5 scfm。
特性
锁定“最后位置”
功率损耗后极低漂移
IP65额定
单零件编号规范
防潮PCB和镀锌组件
好处
如果电源丢失，准确捕获设定值
允许换能器保持设定点
处理潮湿应用
使它很容易指定和涵盖所有的需求
优越的结构，在苛刻的应用中具有防潮性