Fairchild高压调节器适用于高达6000 psig的高供应压力的应用。高压调节器采用不锈钢结构和多种阀座材料,可针对使用气体或液体介质且温度高达华氏500度的应用量身定制。 背压调节器 背压调节器
Model 1600A High Flow Vacuum RegulatorPart Number: M1600A
Rotork Fairchild Model 1600 Vacuum Regulator is designed for systems that require high flow and system pressure control above and below atmospheric pressure. Stability of regulated vacuum or pressure is maintained under varying flow conditions through the use of an aspirator tube which adjusts the inner valve in accordance with the flow velocity. The Model 1600 precision vacuum regulator features control sensitivity of 1" water column and a balanced supply valve to deliver consistent and reliable precision accuracy to maintain your desired set point regardless of supply pressureacuum changes or conditions. The Fairchild Model 1600A will handle a 250 psi, 17 BAR, maximum supply pressure and offers three (3) output pressure ranges from Vacuum-10 psi, Vacuum-0.7 BAR, Vacuum-70 kPa, up to Vacuum-150 psi, Vacuum-10 BAR, Vacuum-1000 kPa. The Fairchild Model 1600A pressure regulator offers up to 28 SCFM, 48 m3/hr vacuum flow capacity.Features
The single unit controls vacuum and positive pressure
High flow capacity
Control sensitivity of 1" water column
Large supply and exhaust valves
Soft supply and exhaust valve
Balanced supply valve
Aspirator tube compensates downstream pressure droop under flow conditions
Separate control chamber isolates the diaphragm from the main flow
Unit construction
Benefits
Highly accurate control of low pressures or light vacuum
Responsive and repeatable operation
Allows use in precision applications
Provide high forward and exhaust flows
Minimizes air consumption
Minimizes the effect of supply pressure variation
Compensates downstream pressure droop under flow conditions
Eliminates hunting and buzzing
Allows you to service the Model 1600 without removing it from the line
型号1600A高流量真空调节器部件编号:M1600A
Rotork Fairchild 1600型真空调节器专为需要高流量和系统压力控制高于和低于大气压力的系统而设计。在不同的流量条件下，通过使用根据流速调节内阀的吸气管来保持调节真空或压力的稳定性。1600型精密真空调节器具有1“水柱的控制灵敏度和平衡供应阀，可提供一致和可靠的精度精度，无论供应压力-真空变化或条件如何，都能保持所需的设定点。Fairchild型号1600A将处理250 psi, 17 BAR，最大供应压力，并提供三(3)输出压力范围从真空-10 psi，真空-0.7 BAR，真空-70 kPa，到真空-150 psi，真空-10 BAR，真空-1000 kPa。Fairchild型号1600A压力调节器提供高达28 SCFM, 48立方米/小时的真空流量能力。特性
单机控制真空和正压
高流量
1”水柱控制灵敏度
大的供排气阀
软供排气阀
平衡供应阀
在流动条件下，吸气管补偿下游压力下降
独立的控制室将隔膜与主流隔离开来
单位工程
好处
高精度低压或轻真空控制
反应灵敏，可重复操作
允许在精密应用中使用
提供高向前和排气流量
减少空气消耗
最大限度地减少供应压力变化的影响
在流动条件下补偿下游压力下降
消除狩猎和嗡嗡声
允许您在不将其从生产线上移除的情况下对1600型进行维修
