10222 Fairchild 仙童精密气动调节器，10222，MRO供应链常卖型号
10222 Fairchild 仙童精密气动调节器，10222，MRO供应链常卖型号
10222 Fairchild 仙童精密气动调节器，10222，MRO供应链常卖型号
Rotork Fairchild Products Model 10 Pneumatic Precision Regulator, 0-10 psi adjust, 500 psi [35 BAR] supply, 40 SCFM [68m3/Hr]@100 psi supply/20 psi set, 1/4 FPT line, 1/4 FPT gauge, Nitrile on Dacron.
Browse All Fairchild Products Products
Browse All Model 10 Products
Manufacturer: Fairchild Products
Accuracy: 0.10 Psi
Ambient Temperature: -40° To 200 °F (-40° To 93.3 °C)
Base Model: 10222
Body Material: Aluminum
Connection Size: 1/4 In. NPT
Elastomer: Nitrile On Dacron
Exhaust Capacity: 5.5 SCFM [9.36m3/Hr] Where Downstream Pressure Is 5 Psi Above 20 Psi Setpoint
Exhaust Type: Straight (Standard)
Flow Capacity: 40 SCFM (68 M³/HR)
Mounting: Wall (09921 Bracket Available)
Operator: Knob (Standard) 1-7/8 In. O.D.
Options: None
Pipe Size: 1/4 FNPT
Pressure Range: 0 To 10 Psig
Product Type: Precision Pressure Regulators
Sensitivity: 1/8 In. W.C.
Supply Pressure: 500 Psi
Trim: Zinc-Plated Steel Brass
Product Category: Regulators
Regulator Type: Precision Pressure Regulator
The Rotork Fairchild Model 10 is a precision pressure regulator designed for applications that require high performance and accurate process control. Stability of regulated pressure is maintained under varying flow conditions through the use of an aspirator tube which adjusts the supply valve in accordance with the flow velocity. The Model 10 features control sensitivity of 1/8 in water column and a balanced supply valve to deliver consistent and reliable precision accuracy to maintain your desired set point regardless of supply pressure changes or conditions. The Fairchild Model 10 pressure regulator will handle a 500 psig [34 BAR] maximum supply pressure and offers nine (9) output pressure ranges from 0-2 psig [0-0.15 BAR] (0-15 kPa) up to 5-400 psig [0.3-28 BAR] (35-2800 kPa).
Highest accuracy pressure regulator available
Prevents supply pressure changes from affecting the setpoint
Isolates diaphragm from flow to eliminate hunting and buzzing
Compensates downstream pressure droop under flow conditions
Select the range best suited for your application
Permits backflow of downstream pressure
Facilitates the handling of harsh media
Hazardous locations: Group II, Category 2, Gas and Dusts: Zones 1, 2 and 21,22, respectively Gas Groups IIA and IIB
NOTES: Oil free air must be applied to the regulator. Use a filter to remove dirt and entrained liquid in the air line ahead of the regulator. If an air line lubricator is used, it MUST be located downstream of the regulator, to avoid interference with regulator performance.
Rotork Fairchild Model 10是一款精密压力调节器，专为需要高性能和精确过程控制的应用而设计。在不同的流量条件下，通过使用根据流速调节供应阀的吸气管来保持调节压力的稳定性。10型水柱的控制灵敏度为1/8，平衡供应阀提供一致和可靠的精度精度，无论供应压力变化或条件如何，都能保持所需的设定点。Fairchild Model 10压力调节器将处理500 psig [34 BAR]最大供应压力，并提供九(9)输出压力范围从0-2 psig [0-0.15 BAR] (0-15 kPa)到5-400 psig [0.3-28 BAR] (35-2800 kPa)。
最高精度的压力调节器
防止供应压力变化影响设定值
将隔膜与流体隔离，消除摩擦和嗡嗡声
在流动条件下补偿下游压力下降
选择最适合您应用的范围
允许下游压力回流
有利于处理苛刻的介质
危险场所:第II组，第2类，气体和粉尘:1、2区和21,22区，分别是气体组IIA和IIB
注意:无油空气必须应用于调节阀。使用过滤器去除调节阀前方空气管路中的污垢和夹带液体。如果使用空气管路润滑器，它必须位于调节器的下游，以避免干扰调节器的性能。
Fairchild 10212 精密调节阀
FAIRCHILD 10262 调压阀
FAIRCHILD 10223 调压阀
FAIRCHILD 10292 调压阀
FAIRCHILD 10232BP 调压阀
FAIRCHILD 4514A 放大器
FAIRCHILD 10262C 调节阀
FAIRCHILD 10232 调压阀
Fairchild 10212 精密调节阀
Fairchild 30252 调压阀
FAIRCHILD 4514AI 气动增压器
FAIRCHILD 4066AH
Fairchild 1042 调压阀
FAIRCHILD 10262CH
FAIRCHILD 10262CH
FAIRCHILD 4516AU
FAIRCHILD 4516AU
FAIRCHILD TD6000-424U 转换器
FAIRCHILD Z105-30242 调压阀
FAIRCHILD 10283T 调压阀
FAIRCHILD 10264 调压阀
FAIRCHILD 10244BP 背压阀
Fairchild 10243JN 调压阀
Fairchild 4046A 调压阀
FAIRCHILD 10244 调压阀
FAIRCHILD 10262无包装
FAIRCHILD 4514AIJ 调压阀